How to Find Hidden Piping and Valves
Should you be a homeowner then knowing the details of your home like the back of your hand is something that is very important. It is important to ensure that you are keen as well and are able to know where things like gas piping as well as valves are so that you are able to switch them off in case of an emergency. Below are some of the ways that you can be able to find out where the various valves are located.
If your home has natural gas then the shutoff valves will probably be located just before the gas meter outside the home. The nub is usually rectangular in shape and uses a wrench but for the most part gas companies usually do not recommend interfering with this valve. A second valve is usually located further down the line or where the gas pipe first enters.
Modern homes usually have gas pipes that are made from a flexible copper pipe and the pipe runs from outside the house into your utility room. Having such a piping usually means that you have a high-pressure gas system for your home. Such gas systems usually have the shutoff valve near the water heater or the furnace.
When it comes to water meters, you will likely have two shutoff valves one before and the other after the meter as shown on this homepage. Cold environments usually have the shut off points located in the house so that they do not freeze. For milder climates, you are most likely to find out that the valves are located in an underground lid or box next to exterior.
Take time to look at property reports if you are finding it hard to locate water shut off valve since they are usually indicated in property reports given in the last phase of the property purchase. It is important to look keenly at the report since it will show you where the valve is located. Pictures of the valves will also be drawn so that you are able to know what they look like.
If you have an automatic sprinkler system then you are going to find that it is hard to locate it since most of them are usually located underground. Since such valves usually have metals then you can easily find them by using a metal detector. Even though such valves may not be located exactly where the plans says using the plans is something that will definitely help you to find out where you need to start.
Cited reference: official website